Install the stand, Install the stand to the pdp – haier 42EP24STV User Manual

Page 15

Install the brace pole

M4X8rom the front .

After put the brace pole to the stand,

use the screw 8 M4x12 to fix it.

Take care not to touch the stand and

the brace pole;

Fix the PMMA baffle with the

screw 2

Install the PMMA Baffle

After installing the brace pole(see figure below)

baffle

and put the baffle into the stand.

rip the protective sheet off of the PMMA

Install the Stand

Face the PDP screen upside down on a clean blanket or the bracket and pay attention not to indent the casing. (See figure)

Lay down the stand and put it to responding position of the PDP screen ,and make sure the brace pole towards the hole of the PDP .

Fix 2 PDP brace pole to the PDP on the back of the plasma display with 4 M5X16 screws.

Install the Stand to the PDP

Owner s Manual 15