Hotpoint EW86 - Manual (Page 29)

Always clean spills immediately. If the hob is reused before cleaning,
spillage will be baked on and be very difficult to remove.
Always switch the cooker OFF at the cooker control panel.
To minimise cleaning:
Always take care and avoid spills.
Always use a Ceramic Hob Cleaner-Conditioner whenever cleaning is
done. The Cleaner-Conditioner forms a protective film on the
hob and contains a mild detergent which makes cleaning
easier. Hotpoint has a Cleaner-Conditioner which can be
obtained, either through a local Hotpoint Service Centre or
retailer, part no.6004.
To clean off stubborn stains, the following can be used when the
surface has cooled:
1.
Cif, non-scratch cream cleaner.
2. Heavy soil can be removed from the surface by carefully
using a glass scraper.
3. Hard water stains, grease spots and any discolouration
having a metallic sheen can be removed with Solvol Autosol
Super or any non abrasive stainless steel cleaner.
After cleaning, always use the Cleaner-Conditioner and finish it off by
polishing with a clean, dry paper towel.
Never use abrasive or chemical oven cleaners as they can damage
the surface of the hob.
The visual effect of any scratches which may occur in use can be
minimised by the use of Cleaner-Conditioner. Such scratches cannot
be removed but do not affect the function of the hob in any way.
Cleaning of the
Ceramic Hob
29
Care and Cleaning of the Oven
WARNING: BEFORE CLEANING, SWITCH THE COOKER OFF AT THE MAINS COOKER
CONTROL PANEL AND ALLOW IT TO COOL. IT IS ESSENTIAL THAT THE OVENS ARE
CLEANED AND KEPT FREE FROM FATS, OIL AND GREASE.