Caution, Preparing the operator, Ii. preparing the site – haier HEATED AIR SPRAY PACKAGE 237410 User Manual

Page 5

CAUTION

This equipment is compatible with most water

based materials. See the wetted parts in the Tech-
nical Data section and your fluid and solvent
manufacturer’s compatibility information.

Do not use catalyzed materials in heated applica-

tions.

Preparing the Operator

All persons who operate the system should be trained

in the safe, efficient operation of all system compo-
nents as well as the proper handling of the chemical

coating. At a minimum, all operators should thoroughly

read the safety, installation, and operation sections of

this manual and the component manuals.

II.

Preparing the Site

1 .

Use at least a 5 HP (3.7 Kw) air compressor for
efficient operation.

2 .

Clear obstacles and debris that could cause an
unsafe operating environment.

3 .

Bring an air line from your compressed air supply
to the pump location. Be sure the air is dry and
filtered. Install a bleed-type master air valve

upstream from the pump. When it is closed and

the pump air regulator (6a) is opened, the
type master air valve relieves all air pressure to the
system components.

4 .

Ventilate the spray booth.

To prevent hazardous concentrations of toxic and/

or flammable vapors, spray only in a properly venti-
lated spray booth. Never operate the spray gun

unless ventilation fans are operating.

Check and follow all of the national, state, and local
codes regarding air exhaust velocity requirements.

K E Y

Components you must supply:

Bleed-type master air valve
Required for pump; order part no.

11 O-223,

Air filter.
Order part no. 11 O-l 46,

A i r s u p p l y l i n e

Grounded 5 gallon metal pail

Air line moisture trap

Components supplied with package:

Husky 307 pump

air spray gun

Fluid heater

6 a

Pump air regulator

6 b

Gun air regulator

1 0

Whip hose

1 3

Drain hose

4 2

female quick

. disconnect coupler

4 3

Pump ground wire

4 4

Fluid regulator

4 5

F l u i d f i l t e r

4 8

Filter drain valve

5 4 a

Gun fluid hoses

5 4 b

Gun air hose

5 8

T i e s t r a p

Fig. 1

308-448