Hunter Fan 44033-01 44277 - Manual (Page 32)

44033-01 • 05/11/2010
32
6
Features
Additional Features
There is no need to stand at the wall where the thermostat is mounted
while programming or changing settings. Simply remove the thermostat
from the wall and make the necessary changes in the comfort of a chair.
You can also set your programming and settings before you even install
the thermostat.
Armchair Programming
Your thermostat has a blue LED lamp that backlights the display for easy
viewing in the dark. When any key is pressed, the backlight will be
activated. The display will stay illuminated for 15 seconds after the last
key is pressed.
Blue Backlight
In the event that power is lost, the batteries will act as backup, saving
your settings and programs.
Power Failure Protection
To protect your system from cycling, system turning on and off rapidly,
your thermostat will prevent your system from turning back on for up to 3
minutes after it has been shut down.
System Protection
In situations where your thermostat may not seem to be operating
properly or if you just want to reset and start over, press and hold the
and buttons for 5 seconds until the screen flashes “Updated!”. This will
restore the thermostat to factory condition.
Reset