Hitachi CP-X267 - Manual (Page 71)

7
4 . Management with Web browser software
4.1 Configuring and controlling the projector via a web browser (Continued)
4 .1 .4 Port Settings
Displays and configures communication port settings.
Item Description
Network Control Port1
(Port:23)
Configures command control port 1 (Port:23).
Port open Click [Enable] check box to use port 23.
Authentication
Click [Enable] check box when authentication is required for
this port.
Network Control Port2
(Port:9715)
Configures command control port 2 (Port:9715).
Port open Click [Enable] check box to use port 9715.
Authentication
Click [Enable] check box when authentication is required for
this port.
SNMP Port Configures the SNMP port.
Port open Click [Enable] check box to use SNMP.
Trap address Configures the destination of the SNMP Trap in IP format.
SMTP Port Configures the SMTP port.
Port open Click [Enable] check box to use the e-mail function.
Click [Apply] button to save the settings.