User controls, Xb31, Sb21 – HP xb31 User Manual
Page 23
23
“All Images” Menu
To open the “All Images” menu:
1. Press the “Menu” button to open the On Screen Display (OSD) menus.
2. Use the
or
buttons to open the “All Images” menu tab.
3. Press the
buttons to select one of the following items:
Brightness
• Press the
button to darken the image.
• Press the
button to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and
darkest parts of the picture.
• Press the
button to decrease the contrast.
• Press the
button to increase the contrast.
Image Optimisation
Image Optimisation can be incrementally adjusted between 0 and 10.
Click on the slider bar to adjust.
• Setting 10 will maximise brightness and contrast
• Setting 0 will maximise colour reproduction quality
Colour Temp
With the higher temperature, the image looks colder. With the lower
temperature, the image looks warmer.
• Press the or
button to decrease or increase the colour temperature.
Keystone (Keystone Correction)
Corrects image distortion caused by the projector’s elevation angle. (±16
degrees)
Zoom
• Press the
button to magnify an image up to 9 times.
• Press the
button to reduce the image magnification.
Aspect Ratio
Aspect ratio type can be adjusted to 4:3 or 16:9.
Reset this menu
Choose “Yes” to return the display parameters on this menu to their factory
default settings.
user
controls
xb31
NOTE: The hp sb21’s OSD
does not include an
Audio menu.
sb21