HP 2800 User Manual
Page 63
Web and MAC Authentication for the Series 2600/2600-PWR and 2800 Switches
Configuring Web Authentication on the Switch
Syntax:
aaa port-access web-based dhcp-lease <5 - 25>
Specifies the lease length, in seconds, of the temporary
IP address issued for Web Auth login purposes.
(Default: 10 seconds)
Syntax:
[no] aaa port-access web-based [e] < port-list>
Enables web-based authentication on the specified
ports. Use the
no form of the command to disable web-
based authentication on the specified ports.
Syntax:
aaa port-access web-based [e] < port-list> [auth-vid <vid>]]
no aaa port-access web-based [e] < port-list> [auth-vid]
Specifies the VLAN to use for an authorized client. The
Radius server can override the value (accept-response
includes a
vid). If auth-vid is 0, no VLAN changes occur
unless the RADIUS server supplies one.
Use the
no form of the command to set the auth-vid to 0.
(Default: 0).
Syntax:
aaa port-access web-based [e] < port-list > [client-limit <1-32>]
Specifies the maximum number of authenticated
clients to allow on the port. (Default: 1)
3-19