beautypg.com

Engine precautions, Operating precautions – Harbor Freight Tools 2" Gasoline Powered Clear Water Pump 68375 User Manual

Page 4

background image

Page 2

For Pump technical questions, please call 1-800-444-3353.

Item 68375

For Engine technical questions, please call 1-800-520-0882.

5. Use only lubricants and fuel recommended in

the Specifications chart of this manual.

6. Wear ANSI-approved safety goggles, heavy-duty

work gloves, and dust mask/respirator during set up.

Engine Precautions

Follow engine precautions and instructions in the included

engine instruction manual.

Operating Precautions

1.

CARbON MONOxIDE HAzARD

Using an engine indoors CAN KILL

YOU IN MINUTES.

Engine exhaust contains carbon

monoxide. This is a poison you cannot

see or smell.

NEVER use inside a home or garage, EVEN IF doors

and windows are open.

Only use OUTSIDE and far away from windows, doors,

and vents.

2. Keep children away from the equipment,

especially while it is operating.

3. Do not touch Pump engine during use.
4. Never store fuel or other flammable 

materials near the Pump engine.

5. Industrial applications must follow OSHA requirements.
6. Do not leave the equipment unattended when it is

running. Turn off the equipment (and remove safety

keys, if available) before leaving the work area.

7. Engine can produce high noise levels. Prolonged

exposure to noise levels above 85 dBA is hazardous

to hearing. Always wear ear protection when operating

or working around the gas engine while it is operating.

8. Wear ANSI-approved safety glasses, hearing

protection, and NIOSH-approved dust mask/

respirator under a full face shield along

with steel-toed work boots during use.

9. People with pacemakers should consult their

physician(s) before use.  Electromagnetic fields 

in close proximity to a heart pacemaker could

cause pacemaker interference or pacemaker

failure. Caution is necessary when near

the engine’s magneto or recoil starter.

10. Use only accessories that are recommended by Harbor

Freight Tools for your model. Accessories that may

be suitable for one piece of equipment may become

hazardous when used on another piece of equipment.

11. Do not operate in explosive atmospheres,

such as in the presence of flammable 

liquids, gases, or dust. Gasoline-powered

engines may ignite the dust or fumes.

12. Stay alert, watch what you are doing and use common

sense when operating this piece of equipment. Do

not use this piece of equipment while tired or under

the influence of drugs, alcohol or medication.

13. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the equipment in unexpected situations.

14. Dress properly. Do not wear loose clothing or

jewelry. Keep hair, clothing and gloves away

from moving parts. Loose clothes, jewelry or

long hair can be caught in moving parts.

15. Parts, especially exhaust system components,

get very hot during use. Stay clear of hot parts.

16. Do not cover the engine or equipment during operation.
17. Keep the equipment, engine, and

surrounding area clean at all times.

18. Use the equipment, accessories, etc., in accordance

with these instructions and in the manner intended for

the particular type of equipment, taking into account

the working conditions and the work to be performed.

Use of the equipment for operations different from

those intended could result in a hazardous situation.

19. Do not operate the equipment with known

leaks in the engine’s fuel system.

20. This product contains or, when used, produces a

chemical known to the State of California to cause

cancer and birth defects or other reproductive harm.

(California Health & Safety Code § 25249.5, et seq.)

21. When spills of fuel or oil occur, they must be

cleaned up immediately.  Dispose of fluids and 

cleaning materials as per any local, state, or

federal codes and regulations. Store oil rags in

a bottom-ventilated, covered, metal container.

22. Keep hands and feet away from moving parts.

Do not reach over or across equipment while operating.