Huffy 1051 - Manual (Page 11)

12/02 P/N 211670
11
Slide Hopper assembly (15) over the top of the pole (5) tighten bolts indicated.
13.
15
Tighten completely
9/16" wrench needed
5
THE HOPPER IS HEAVY! TWO PERSON
MINIMUM REQUIRED FOR THIS PROCEDURE.
NOT FOLLOWING RECOMMENDATION MAY
RESULT IN BODILY INJURY.
DO NOT LEAVE ASSEMBLED UNIT
UNATTENDED WITHOUT SAND SUPPORT,
IT MAY TIPOVER.
WARNING
IMPORTANT!
DO NOT EMPTY SAND FROM
SAND BAGS INTO THE
STORAGE BAGS. PLACE
SEALED SAND BAGS
COMPLETELY INTO
STORAGE BAGS.
14
Place (2) 100 lb. sand bags (not included) into storage bags (35). Add bags to the
base as shown.
16
35