Hotpoint HDA797K - Manual (Page 5)

●
For PLATE cycle:
a. Load clean plates and dishes to
be warmed.
b. Select DRYING HEAT–ON
drying option.
c. the door unlatched.
LIGHT WASH ■
ON ■
OFF ■
● . RINSE
HOLO
PLATE WARMER
■ HEAT%
d.
e.
Slowly turn Cycle Indicator Dial
clockwise to PLATE WARMER
position.
Latch the door to start the cycle.
Cycle selection
It is important to follow the loading
instructions on pages 8 and
9.
& PANS—For items such as
pots, pans, cookware, dishes and
glasses with heavy soil. Everyday
dishes may be included.
NORMAL WASH—For most
loads of everyday dishes, glasses
and cookware
medium soils.
LIGHT WASH—For dishes
that have been pre-rinsed before
loading. Also, for washing very
lightly soiled dishes with soils
that have not dried on.
HOLD–For rinsing
partial loads which will be washed
later. Select DRYING
OFF drying option.
not use
detergent.
PLATE WARMER—For warming
clean dishes and serving plates for
the serving of hot food.
What happens in each cycle
PANS 12.6
WASH 10.7
LIGHT WASH 7.1
RINSE HOLD 3.6
Minimum
Wash
Time
minutes) Cycle Sequence
‘ 5 *
55*
43*
11 Rinse Rinse
●
You’ll hear occasional clicking ●
During the drying period:
sounds:
—The motor stops.
—Soft food disposer shredding
–Water vapor is released through
action.
the vent under the door handle.
—Drain valve opening to pump It maybe visible.
water out.
—Timer control as cycle
progresses.
—Detergent cup opening.
*DRYING HEAT—ON:
Add
5