Honeywell CT3455 - Manual (Page 9)

COOLING PROGRAM
The times you set for heating remain the same for cooling; you only need to program the temperatures.
With system switch at COOL, press and release . Use
a
to program Mon-Fri
MORNING temperature. Repeat using DAYTIME, EVENING, NIGHT keys.
For Saturday, press to SAT. Press and release ; use
a
to
program
Saturday morning temperature. Repeat using DAYTIME, EVENING, NIGHT keys.
For Sunday, press to SUN. Repeat steps as you did for SAT.
After programming, adjust fan and system switches as desired.
Press and release to start the program.
a
Press on to move number back; press on to move number ahead.
Time
When programming your new thermostat, use this guide. Batteries are required for programming
and operation.
SET PRESENT DAY
Press and release then until present day shows.
SET PRESENT TIME
Press and release then until present time shows.
HEATING PROGRAM
With system switch at HEAT, press and release . Use and to
program Mon-Fri MORNING time and temperature. Repeat using DAYTIME, EVENING, NIGHT
keys.
For Saturday, press to SAT. Press and release ; use and
to program Saturday morning time and temperature. Repeat using DAYTIME, EVENING,
NIGHT keys.
For Sunday, press to SUN. Repeat steps as you did for SAT.
13 69-0733—3
Morning Time
a
Temp
a
PROGRAMMING
14 69-0733—3
Temp
Morning Time Day
a
a
Day
Set
Present
Day/Time
Day
Set
Present
Day/Time
a
Morning Temp
Day
Day
Run
Program
Morning Temp