Philips FC6130 - Manual (Page 9)

5 To place the appliance in upright position, align the ridges on the
floor nozzle with each other (Fig. 6).
6 Put the plug in the wall socket.
Brush tool and crevice tool
You can use the brush tool to clean delicate surfaces.
With the crevice tool, you can quickly and conveniently clean hard-to-
reach places.
1 Attach the brush tool or the crevice tool to the nosepiece of the
appliance (Fig. 7).
hose (FC6130 only)
This appliance comes with a hose for extended reach during vacuum
cleaning.
1 Insert the appliance end of the hose into the nosepiece of the
appliance (Fig. 8).
2 Attach the brush tool or the crevice tool to the attachment end of
the hose for extended reach during vacuum cleaning (Fig. 9).
using the appliance
Always switch off the appliance before you connect or disconnect
accessories.
1 Put the plug in the wall socket.
2 Push the on/off slide on the vacuum cleaner or on the stick
(FC6132 only) forwards to switch on the appliance (Fig. 10).
3 Push the on/off slide on the vacuum cleaner or on the stick
(FC6132 only) backwards to switch off the appliance (Fig. 11).
Cleaning
Never immerse the appliance in water or any other liquid, nor rinse it
under the tap.
English 9