Hitachi DZ-HS500SW - Manual (Page 63)

En
g
lish
63
SWITCHING QUALITY OF STILL IMAGE (QUALITY)
You can switch the still recording quality.
1
Press the MENU button, use the 2/1/
0/// buttons to choose “Quality” on
the “Record Functions Setup” menu screen,
and then press the button.
2
Choose the option you want, and then press
the button.
3
Press the MENU button to end the setting.
Note
:
• The still quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
RECEIVING IMAGE FROM ANOTHER DEVICE (INPUT SOURCE)
If you wish to input an image from another device to this DVD video camera/recorder, you must
first switch the setting on the DVD video camera/recorder.
Refer to the explanation starting from page 115 on how to connect the DVD video camera/recorder
to other devices or record images input from them.
1
Press the MENU button, use the 2/1/
0/// buttons to choose “Input
Source” on the “Record Functions Setup”
menu screen, and then press the button.
2
Choose “LINE”, and then press the
button.
3
Press the MENU button to end the setting.
Note :
The “Input Source” setting will return to “CAMERA”
whenever the DVD video camera/recorder is turned off.
It is recommended that you use “FINE” when recording vital images (p. 156 “Size And Quality
Of Photos”).
Setting Content On-screen display
CAMERA Usually select this option No display
LINE To input image from another device L IN
HDD HDD