Husqvarna 325HD60 - Manual (Page 20)

20 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
Technical data 323HD60 325HD60 325HD75
Engine
Cylinder displacement, cm
3
24,5 24,5 24,5
Cylinder bore, mm 34 34 34
Stroke, mm 27 27 27
Idle speed, rpm 2700 2700 2700
Recommended max. speed, rpm 11000-12600 11000-12600 11000-12600
Max. engine output, acc. to ISO 8893 0,9/9000 0,9/9000 0,9/9000
Catalytic converter muffler Yes Yes Yes
Speed-regulated ignition system Yes Yes Yes
Ignition system
Manufacturer/type of ignition system WalbroMB/SEM AM49 WalbroMB/SEM AM49 WalbroMB/SEM AM49
Spark plug Champion RCJ 7Y Champion RCJ 7Y Champion RCJ 7Y
Electrode gap, mm 0,5 0,5 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Zama C10Q Zama C10Q Zama C10Q
Fuel tank capacity, litre 0,40 0,40 0,40
Weight
Weight without fuel, cutting attachment and guard, kg 5,6 5,6 5,9
Noise emissions
(see note 1)
Sound power level, measured dB(A) 109 109 109
Sound power level, guaranteed L
WA
dB(A) 109 109 109
Noise levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
100 100 99
Vibration levels
Vibration levels at handles, measured according to EN/
ISO 11806 and ISO 7916, m/s
2
Idle speed, rear/front handles: 2,0/2,0 1,5/2,3 2,3/3,5
Max. speed, rear/front handles: 4,1/5,6 5,5/6,0 3,9/2,5
Blades
Type Double sided Double sided Double sided
Length, mm 600 600 735
Blade speed, cuts/min 4695 4695 4695