Hunter Fan NiteGlo Evaporative Humidifier - Manual (Page 9)

41713-01 07/19/2004 9 ©2004 HUNTER FAN CO.
ENGLISH
To obtain a service part for your humidifi er, call customer service at 1-888-830-1326 or e-mail
us at [email protected]. Please be prepared to tell the operator the model number
of your humidifi er and the name of the part you need to replace and the part number. Refer
to Figure 1 for part names.
Service Parts
Model
No.
Filter Frame Base Water Tank
Power/Speed
Control
Tank Cap
Water
Diffuser Cap
PermaWick ™
Filter
33255
95449-01-000 95402-01-325 95160-01-326
65115-01-325 86113-01-325
74884-01-000
74080
33257
34355
95451-01-000
95401-01-325 95182-01-326
74082 34356 95401-01-361 95182-01-363 65115-01-362 86113-01-362
34357 95401-01-325 95182-01-326 65115-01-325 86113-01-325
the tank to completely dry. Continue to
clean the other parts of your humidifi er.
9. Remove the water diffuser cap by
squeezing the two tabs as shown in Figure
8. Rinse the cap in clean water to remove
any debris. If the cap contains hard water
residue, soak it in a mixture of one (1) quart
of water and two (2) ounces of vinegar for
20 minutes. Rinse well and reinstall the
water diffuser cap. Do not expose mo-
tor or other electrical components to
water.
10. Wipe the surfaces of the main housing with
a soft cloth.
11. Once all the parts are clean, reassemble the
humidifi er, and follow the USING YOUR
HUMIDIFIER instructions to continue use.
If you are storing the humidifi er, make
sure the parts are completely dry, reas-
semble, and store in a dry location.
Figure 8
Water
Diffuser Cap
Tab
Tab
41713_booklet.indd 9 7/19/04, 7:22:39 PM