Hitachi CP-X608 - Manual (Page 58)

58
MIU Menu
Item Description
INFORMATION
Selecting this item displays the MIU-INFORMATION dialog for confirming
the network setting.
• Only the first 6 characters of the projector name are displayed.
• Only the first 3 characters of the SSID are displayed.
• When the voltage level of the battery for the built in clock decreases, the
set time may become incorrect even though accurate date and time are
input. Replace the battery suitably. (63)
• MAC wireless will not be displayed when the NETWORK MODE is set to
the WIRED even if the wireless LAN SD card is mounted.
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate “0.0.0.0”
in the following condition.
() The NETWORK MODE is set to the WIRELESSE and the wireless LAN
SD card is not mounted.
() DHCP is ON and the projector does not get address from DHCP server.
SERVICE
Selecting this item displays the SERVICE menu.
Use the ▲/▼ buttons to select an item, and the ► or
ENTER button on the remote control to perform the
item.
REMOVE ALL, REMOVE SD CARD, REMOVE USB
Use the ▲ button to perform the procedure to remove
the media.
EXECUTE  CANCEL
• Before removing the SD card or USB memory, be sure
to perform the REMOVE procedure.
MIU RESTART
Use the ▲ button to restart the network communication.
The network communication will be cut off once and
restarted.
EXECUTE  CANCEL
• After selecting the EXECUTE, the MIU menu may not be controlled
approximately 0 seconds.
• If DHCP is ON, IP address may be changed.
MIU Menu (continued)
4'/18'#..
':'%76'
%#0%'.
'0%4;26+109'2DKV
+2#&&4'55
57$0'6/#5-
/+7+0(14/#6+10
&'(#7.6)#6'9#;
0#/'
'#0&6+/'
6+/'&+(('4'0%')/6
/1&'#&*1%
%*
12'4#6+10.+8'
75$/'/14;
5&%#4&9+4'.'55.#0
52''&/
/#%'6*'40'6
/#%9+4'.'55
55+&
0'6914-/1&'9+4'.'55
SERVICE
REMOVE ALL
REMOVE SD CARD
REMOVE USB
MIU RESTART
MIU RESTART
EXECUTE
CANCEL