Hitachi CP-X608 - Manual (Page 55)

55
(continued on next page)
Item Operation
e-SHOT
Selecting this item displays the e-SHOT menu.
Use the ▲/▼ buttons to select an item which
is a still image by the e-SHOT ( 4.7 e-SHOT
(Still Image Transfer) Display of the User’s
Manual - Network Functions) and the ► or
ENTER button to display the image.
• Insert the SD memory card or USB memory into the projector
before you use the e-SHOT function. (12)
• The item without image stored cannot be selected.
• The image names are each displayed in 6 characters or less.
• Japanese file name is displayed correctly only when the projector’s
language is set to Japanese. And the characters other than alphanumeric
character are not displayed correctly in Japanese mode. (З, д, etc.)
To switch the image displayed
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ or ESC button on the remote control.
To erase the image displayed and its source file in the SD card
or USB memory
() Press the RESET button on the
remote control while displaying
an image to display the e-SHOT -
RESET menu.
() Press the ENTER button on the remote control or the INPUT
button on the projector to perform to erase.
To stop erasing, press the ◄ button and INPUT button on the
projector.
SETUP
Selecting this item displays the MIU SETUP menu.
Use the ▲/▼ buttons to select an item, and the ►
or ENTER button on the remote control to perform
the item.
DHCP (Dynamic Host Configuration Protocol)
Use the ▲/▼ buttons to turn DHCP on/off.
TURN ON ó TURN OFF
• Select TURN OFF when the network does not have
DHCP enabled.
&*%2
674010
67401((
/+75'672
&*%210
+2#&&4'55
57$0'6/#5-
&'(#7.6)#6'9#;
'#0&6+/'
6+/'&+(('4'0%'
/1&'
%*
0'6914-/1&'
52''&
'0%4;26+10
MIU Menu
MIU Menu (continued)
G5*16
+/#)'
+/#)' &'/10564#6+10
&'/10564#6+10
6#$.'
24'5'06#6+10(+.'
+/#)'
+/#)'
G5*16
4'5'6 +/#)'
01;'5 '5% '06'4