Hitachi CP-X608 - Manual (Page 56)

56
Item Description
SETUP
(continued)
IP ADDRESS
Use the ▲/▼/◄/► buttons to enter the IP
ADDRESS. This function can only be used
when DHCP is set to TURN OFF.
• The IP ADDRESS is the number that identifies this projector on the
network. You cannot have two devices with the same IP ADDRESS
on the same network.
SUBNET MASK
Use the ▲/▼/◄/► buttons to enter the
same SUBNET MASK used by your PC. This
function can only be used when DHCP is set
to TURN OFF.
DEFAULT GATEWAY
Use the ▲/▼/◄/► buttons to enter the
DEFAULT GATEWAY (a node on a computer
network that serves as an access point to
another network) address.
This function can only be used when DHCP is
set to TURN OFF.
TIME DIFFERENCE
Use the ▲/▼ buttons to enter the
TIME DIFFERENCE.
Set the same TIME DIFFERENCE
as the one set on your PC. If unsure,
consult your network administrator.
Use the ◄ button to return to the menu
after setting the TIME DIFFERENCE.
DATE AND TIME
Use the ▲/▼/◄/► buttons to enter the
Year (last two digits), Month, Date, Hour and
Minute.
• The projector will override this setting and
retrieve DATE AND TIME information from the
Timeserver when SNTP is enabled. ( 2.5.7
Date/Time Settings of the User’s Manual -
Network Functions)
+2#&&4'55
255. 255. 0
SUBNET MASK
255.
6+/'&+(('4'0%'
㪞㪤㪫㩷㪇㪇㪑㪇㪇
'#0&6+/'
0. 0. 0
DEFAULT GATEWAY
0.
MIU Menu (continued)
MIU Menu
(continued on next page)