Hotpoint HDA330 - Manual (Page 12)

HOW TO CHANGE COLOR PANELS
If you are redecorating, you can change your dishwasher’s front panel to
match or blend with your new colors by flipping it over. Each side of each
panel is a different color. You may also paint a panel with a color of your
own choice.
How to Change the Door Panel
1. Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful— edges may be sharp.)
3. Turn the door panel around and put the color you
want in front.
4. Replace the door panel, side trim and screws.
NOTE: Do not operate
dishwasher while changing
panels or when lower access
panel is removed.
12
How to Change the Bottom Panel:
1. Remove the bottom panel attachment screws.
2. Remove the top mounting screws.
3. Take out the top trim screws and remove the
top trim.
4. Slide the color panel(s) up and out and put the
color you want in front.
5. Replace the top trim and screws.
6. Replace the entire assembly by reversing
the steps.
Bottom Panel Attachment Screws
Top
Trim
Top
Mounting
Screw
Wood Panel Trim Kits
Wood panel trim kits contain trim
and instructions for adding a
decorative wood door panel and
lower access panel to match
kitchen cabinets. You supply the
wood panels which should be no
thicker than 1/4
″
.
Specify the kit number when
ordering.
GPF40BC (Chrome Trim & Screws)
GPF40BK (Black Trim)
GPF40WD (White Trim)
GPF40AD (Almond)
Color Panels
If you have redecorated and the
color panels in your dishwasher do
not blend with your new color
scheme you may order an additional
color panel.
Specify the color panel number
when ordering.
GPF24 White/Almond
GPF26 Harvest/Black
GPF27 Black/White
Ordering Information
Color panels and wood panel trim
kits are available at an extra cost by
calling, toll-free, 800-626-2002.
Your order will be sent directly to
your home. VISA, MasterCard and
Discover cards are accepted.