Henny Penny HMI-103 - Manual (Page 15)

Model HMI-103/105
SECTION 4. TROUBLESHOOTING
PROBLEM CAUSE CORRECTION
Product not holding
temperature
• Radiant heat too low
• Only hold product for recommended times
• Turn to a higher setting
• Turn to a higher setting
• Product held too long
• Air heat too low
Lights will not
turn on • Check fuse and replace if necessary • Defective fuse
• Replace with recommended bulb • Faulty light bulb Not all lights turn on
4-1. TROUBLESHOOTING GUIDE
More detailed troubleshooting information is available in the Technical Manual, available at www.hennypenny.com,
or 1-800-417-8405 or 1-937-456-8405.
203 4-1