Henny Penny HMI-103 User Manual
Page 10
Model HMI-103/105
3-4. SHUT DOWN AND CLEAN UP
1. Remove all power from unit by unplugging the cord
or turning off the wall circuit breaker.
To avoid burns, allow the unit to cool before cleaning.
2. Remove well cover, and clean with soap and water at
sink.
3. Clean all surfaces with a soft cloth, soap, and water.
Do not use steel wool, other abrasive cleaners or
cleaners/sanitizers containing chlorine, bromine, iodine
or ammonia chemicals, as these will deteriorate the
stainless steel, and glass material, and shorten the life
of the unit.
Do not use a water jet (pressure sprayer) to
clean the unit, or component failure could result.
4. Clean around electrical controls and components with
a damp cloth.
5. Clean glass with a non-streaking liquid glass cleaner and a
soft cloth.
3-2
203