HONDA HARMONY II HRS216PDA - Manual (Page 15)

A dull blade can be sharpened, but a blade that is worn out, bent,
cracked, or otherwise damaged must be replaced. A worn or damaged
blade can break, causing blade pieces to be thrown from the mower.
When a blade needs sharpening or replacement take the lawn mower
to an authorized Honda servicing dealer. Or, if you have a torque wrench,
you can remove and install the blade yourself (see pages 38).
Check that the blade bolts are tight (see page ).
Engine Oil Level
Check the engine oil level with the engine stopped and the mower on
a level surface.
1. Remove the oil filler cap, and
wipe the dipstick clean.
2. Insert and remove the dipstick
without screwing it into the filler
neck. Check the oil level shown
on the dipstick.
3. If the oil level is low, add the
recommended oil (see page 34)
to reach the upper limit mark on
the dipstick. Do not overfill.
4. After checking the engine oil
level, screw in the filler
cap/dipstick securely.
BEFORE OPERATION
13
FILLER CAP/DIPSTICK
FILLER CAP/
DIPSTICK
UPPER LIMIT
LOWER LIMIT