Controls 10 – HONDA HARMONY II HRS216PDA User Manual

Page 12

Text mode
Original mode

Flywheel Brake Lever

This lever is connected to the
engine flywheel brake and the
ignition switch. The engine will not
start unless this lever is pulled
backward.

Drive Clutch Lever (SD)

The drive clutch lever engages
(push forward) and disengages
(release) the transmission that
drives the rear wheels. The drive
clutch lever should only be
engaged after the engine has
been started.

Cutting Height Adjustment Levers

There are six approximate settings [1 ~ 3-1/2 in. (25 ~ 87 mm)]. The
adjusters move back to lower and forward to raise the mower deck.
For the best overall lawn finish, each wheel should be adjusted to the
same position.

CONTROLS

FLYWHEEL BRAKE LEVER

DRIVE CLUTCH LEVER (SD)

1" (25 mm)

1-1/2 " (37 mm)

2" (50 mm)

2-1/2" (66 mm)

3" (75 mm)

3-1/2 (87 mm)

REAR ADJUSTMENT LEVER

FRONT
ADJUSTMENT
LEVER

RIGHT SIDE SHOWN