HP M527 - Manual (Page 29)

3. Highlight Share Menu Setup..., then press .
Connect the camera to your computer using the USB
cable that came with your camera. Follow the
instructions in the Share dialog box to set up
destinations in your camera.
4. Disconnect the camera from the computer, then
press to verify that the new destinations are now
in the camera.
Sending images to online destinations
1. Turn on the camera, then press .
2. Use to highlight the first destination.
3. Use to select a still image that you want to send,
then press to select it. A appears over the
destination in the Photosmart Express Menu. To
deselect the destination, press
again.
4. Use to highlight the next destination, then
press . Repeat Step 3 to continue selecting
images to send.
5. To exit the Photosmart Express Menu, press
.
6. Connect the camera to your computer using the USB cable that came with your
camera. The images are automatically sent to their destinations.
Selecting images for printing
1. Turn on the camera, then press .
2. Use to highlight Print.
3. Use to display an image you want to mark for
printing, then press to display the Print sub-
menu.
4. Use to specify the number of copies to print
(up to 99), then press . To deselect Print, select
Print again, set the number of copies to 0, then
press
.
5. To select additional images to mark for printing,
use
to display an image, press , and repeat
Step 4.
6. To exit the Photosmart Express Menu, press .
7. Connect the camera to a PictBridge-certified printer using the USB cable that came
with your camera. The images you selected are automatically printed.
HP Photosmart M527 Digital Camera 29