Hellenbrand TS Series - Manual (Page 2)

1. One-Inch or Inch and One-Half NPT Inlet Connec-
tion.
2. One-Inch or Inch and One-Half NPT Outlet Connection.
3. Stainless Steel Backplate will not rust or corrode.
4. Factory installed Drain Line Flow Control maintains
accurate backwash rates.
5. Solid Brass Valve assures durability and long life.
6. Self Cleaning Teflon-coated Piston allows foreign
particles to pass through without damaging the unit.
It is hydraulically balanced to equalize pressure on
both sides of the piston, allowing it to shift smoothly
regardless of water pressure. Plastic spacers and rub-
ber seals protect the piston from sediment in water.
7. Separate “Time-fill” Brining with accurate flow controls
allows automatic brine tank refill. Brine Tank Refill Rates
are easily adjustable on the cycle programmer.
8. Heavy-duty Drive Motor receives signal from timer to
efficiently direct water flow during regeneration. Piston
shifts smoothly and quietly regardless of water pres-
sure.
9. TS Series Timer provides fully automatic, dependable
timing for regeneration. The Cycle Programmer regu-
lates all regeneration cycles which are easily adjustable.
For manual regeneration start, simply turn the service
indicator clockwise. No need to push any buttons or
reset timer. NOTE-Complete manual operation, without
electricity is also available.
10. Flow Director for mechanical meter applications ac-
curately directs flow even under low flow conditions.
Not shown in photo.
11. Tough Space Age, Corrosion-resistant plastic registers flow
even during power outages with mechanical meters.
Hellenbrand Means
Quality and Reliability
The only Waunakee in the world, a village of nearly 7,500 people in South Central Wisconsin, is the home of Hellenbrand
Water Conditioners. Waunakee, an Indian name that means “peaceful valley”, is the ideal setting for a company with
neighborly, small town concern for its customers and dealers. Since it opened its doors in 1967, Hellenbrand has offered
something you rarely find anywhere today—well-designed, quality products backed up with fast, reliable service. Here
are several important benefits that go into Hellenbrand TS Series Conditioners.
TS Series Conditioners use a top-mounted, one-inch or inch and one-half inlet and outlet solid brass valve with a motor-
driven, time-tested, hydraulically-balanced piston and seal and spacer concept to pilot service flow not dependent on
water pressure. It’s clean, direct-operating, and reliable. They have factory-wired electrical systems to assure easy installation.
The TS Series offers you a choice of complete manual operation, fully-automatic time clock operation, mechanical meter
demand systems or microprocessor meter demand systems.
An optional new piston design is available which prevents hardwater by-pass during the regeneration cycle of the
softener. The “no hardwater by-pass piston” will not take the place of an additional lockout control valve for alternating
purposes.
TS Series 1" OR 1-1/2" NPT Control Valve
(TS Series 1-1/2" Control With System Four 1" Econominder Meter Shown)
2
9
8
3 4
7 6 5
1
11