Honeywell HRDP DVR - Manual (Page 34)

Setup
______________________________________________________________________________________________
34
Overwrite
Sets options for overwriting data when the Hard Disk Drive becomes full.
Enable HDD Overwrite to allow the DVR to write over previously recorded
data, starting with the oldest date, when the HDD is full. If set to Off the DVR will
not record any new data once the HDD becomes full. (Default)
Enable Disk Full Warning for notification when the HDD becomes full and
HDD Overwrite is disabled.
Check
Checks the HDD for errors or failure.
HDD OVERWRITE
DISK-FULL WARNING
REMAIN TIME
USED SPACE
DISK-FULL ALARM
DISK-FULL BUZZER
DISK FULL MESSAGE
FORMAT OVERWRITE CHECK SMART
ENABLE
ON
30 MIN
90%
0
OFF
OFF