Hotpoint RLS80 - Manual (Page 5)

Installation
5
SAFET
Y &
INST
ALL
A
TION
Levelling:
Level the fridge when it is in its final location by adjusting the front feet, until firm
contact is made with the floor. This will stop rocking or vibration and keep the door
aligned which helps the fridge run reliably and efficiently.
Note: Before plugging in and switching on, leave the fridge standing
in its final location for at least 15 minutes to allow it to settle.
Joining:
Equal height Hotpoint ‘FUTURE’ fridges and freezers can be joined together to look
like one unit by using a Filler Kit available from Hotpoint Genuine Parts & Accessories
Mail Order Hotline (see KEY CONTACTS, back page).
Hinge Covers:
After the front feet have been adjusted and the fridge is level fit the left and right
hand bottom hinge covers supplied.
To fit:
Align the bottom hinge cover onto the
cover plate slots.
Push until the bottom hinge cover
clicks into place.