Hotpoint RLS80 User Manual

Getting started

LARDER FRIDGE - MODEL RLA80, RLM80, RLS80

INSTRUCTIONS FOR INSTALLATION & USE

GETTING STARTED:

To ensure that your fridge runs reliably and efficiently follow these steps.

SAFET

Y &

INST

ALL

TION

ONTR

OLS

USEFUL AD

VICE

CLEANING &

MAINTENANCE

SER

VICE &

GU
AR
ANTEE

TR
OUBLESHOO

TING

Choose a location for

your fridge, away from

any heat sources and

allow adequate

ventilation - 100mm

(4 inches) gap above.

To prevent the fridge

tilting forwards it must be

held in place with the

stability bracket supplied.

Level the fridge by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.

NB. The spanner is for illustration
only and is not supplied with the
fridge.

Plug in and switch on.
Allow the fridge to cool
before placing food
inside.
All food in the fridge
should be covered.

Move the fridge into
position, using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.

Before plugging in and
switching on, leave the
fridge in its final
location for at least 15
minutes to allow it to
settle.

STEP 1

STEP 2

STEP 3

After the front feet have

been adjusted and the

fridge is level, fit the left

and right hand bottom

hinge covers supplied.

Align with the cover plate

slots and push into

position.

STEP 5

STEP 4

STEP 6

STEP 7

Your fridge is now
working.
If after 24 hours your
fridge is not operating as
you want, refer to the
TROUBLESHOOTING
section.

STEP 8

Read the rest of these instructions to get the best from your appliance

and remember to fill in your guarantee registration.

Keep this Book in a safe place for quick reference.