Hitachi P50T501 - Manual (Page 29)

29
test-bleed 3/3/06 10:18 AM Page 103
How to Use the Remote to Control Your TV
VOLUME (VOL), MUTE button
Press the VOLUME button (
̆ or ̄) until you obtain
the desired sound level.
To reduce the sound to one half of normal volume
(SOFT MUTE) to answer the telephone, etc., press
the MUTE button. Press the MUTE button again to
turn the sound off completely (MUTE). To restore
the sound, press the MUTE button one more time,
or VOL UP (
̆).
Closed Captioning will display automatically when
MUTE/SOFT MUTE is on and Closed Caption is set
to AUTO (see page 60).
When the TV power is turned off at a volume level
31 or greater, the volume level will default to 30
when the TV is turned on. However, if it is set to a
level 30 or less, the volume level will be at the level
it was set when the TV is turned on.
CHANNEL SELECTOR/FAVORITE CHANNEL
(FAV CH)/ENTER buttons
The CHANNEL SELECTOR buttons are used to
select channels, lock access code, etc. Use the
CHANNEL SELECTOR buttons to enter one, two,
or three numbers to select channels. Enter 0 first
for channels 1 to 9, or simply press the single digit
channel you wish to tune then
press the ENTER button
for the TV to tune. Channel selection may also be
performed by CHANNEL (CH) UP (
̆) or
CHANNEL (CH) DOWN ( ̄).
Press the FAV CH button to switch to Favorite
(FAV) channel mode. You will know you are in
Favorite Channel mode when (FAV) is displayed
and the displayed channel is GREEN. Press it
again to return to your regular tuned channels. You
can add any channel to your Favorite channel list
by pressing and holding down the FAV CH button
until the displayed channel turns from WHITE to
highlighted GREEN. You can also delete a channel
from your favorite channel list by pressing and
holding down the FAV CH button until the
displayed channel turns highlighted GREEN to
WHITE.
(-) DASH button
LAST CHANNEL button
Press this button to toggle between the current and
last channel viewed.
RECORD button
Press to record programs when
the remote is in
PVR/VCR mode.
ƻ
Cable 6
FAV Cable 6
Cable 6
Volume 8
Soft Mute 8
Mute 8
18
19
ƺ
Use the (-) DASH button with the CHANNEL
SELECTOR buttons to enter Digital Channels that
have subchannel numbers indicated by (-) DASH
(example 15-1).
17
T
he
Remote C
ontrol