Harbor Freight Tools Chicago Electric LED Work Light 66308 - Manual (Page 2)

SKU 66308 For technical questions, please call 1-800-444-3353. Page 2
SAVe thiS mAnuAl
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month and
year of purchase if product has no num-
ber). Keep this manual and the receipt in
a safe and dry place for future reference.
importAnt SAFetY
inFormAtion
in this manual, on the labeling,
and all other information
provided with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. obey all
safety messages that
follow this symbol to avoid
possible injury or death.
general Safety rules
wArning read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and
instructions for future
reference.
work area safety 1.
keep work area clean and well a.
lit. Cluttered or dark areas invite
accidents.
do not operate the light in explo-
b.
sive atmospheres, such as in the
presence of flammable liquids,
gases or dust. The Light gener-
ates heat sparks which may ignite
the dust or fumes.
electrical safety 2.
the light’s plug must match the a.
outlet. never modify the plug in
any way. do not use any adapter
plugs with the light. Unmodi-
fied plugs and matching outlets will
reduce risk of electric shock.
Avoid body contact with ground-
b.
ed surfaces such as pipes,
radiators, ranges and refrigera-
tors. There is an increased risk
of electric shock if your body is
grounded.
do not expose the light to rain
c.
or wet conditions. Water entering
the Light will increase the risk of
electric shock.
do not abuse the cord. never
d.
use the cord for carrying, pulling
or unplugging the light. keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk
of electric shock.
For indoor use only.
e. Do not use
this product outside or in wet loca-
tions.
personal safety 3.
use personal protective equip- a.
ment. wear AnSi-approved eye
protection during assembly.
do not overreach. keep proper
b.
footing and balance at all times.
This enables better control of the
Light in unexpected situations.
light use and care 4.
maintain the light. check for a.
breakage of parts and any other
condition that may affect the
light’s operation. if damaged,
have it repaired before use.