Hitachi VT-FX633A - Manual (Page 61)

61
4 Press the number button corresponding to your cable box a shown in the set-up chart. The cable box
channel will change to confirm that the remote control has been set.
Cable Box Press "CATV" and
this remote button Cable Box Press "CATV" and
this remote button
Jerrold 1 1 Zenith 5
Jerrold 2 2 Scientific
Atlanta
6
Jerrold 3 3 Pioneer 7
Hamlin 4 Philips 8
Note: If your cable box is not listed on the Set-Up Chart, try all the buttons listed in the chart until the
cable box changes channels. If the cable box channel does not change, you won't be able to program the
remote for your cable box.
Using the VCR remote to control your cable box.
1 Press the "CATV" button on the remote control.
2 Point VCR remote control toward cable box.
3 3 Press the CH (channel / ) button.
Remote Control Illustration.
INTEGRATING YOUR STEREO SYSTEM WITH YOUR VCR
Hookup
When your VCR is connected to a stereo system, you can:
• Make high quality "audio only" recordings for up to 6 hours (on a T-120 video cassette tape).
• Receive quality stereo sound from your VCR through your stereo system.
• Use the VCR as an extra audio tape deck for dubbing.
Hook-up Illustration.