Hitachi VT-FX633A User Manual
Page 53
53
6 Press the number buttons to assign your broadcast channel number to the corresponding VCR Plus+
channel.
In this example broadcast channel 38 is assigned to VCR Plus+ channel 42.
Note: If you enter a wrong digit, press the CLEAR button to erase the wrong number and enter the correct one.
7 Repeat steps 5 - 6 for all channels that need to be assigned.
8 Press the GUIDE button to end the setup procedure.
You are ready to begin delayed recording with the VCR plus+ system.
Remote Control Illustration.
Using the VCR Plus+ system to record a program (by using TV screen)
1 Insert a blank or erasable tape.
The power comes on automatically and the tape indicator lights on the display.
• When a cassette without its safety tab is inserted, playback starts automatically and VCR Plus+ recording won't
operate.
2 Press the PROGRAM button to select VCR PLUS+ RECORDING.
• If eight programs have already been stored in memory, "FULL" will flash in the VCR's display for about 5
seconds.
• The screen on the right will not appear at this time.
Remote Control Illustration.