HoMedics BPA-200 User Manual

Page 26

CARE, MAINTENANCE & CLEANING
1. Clean the blood pressure monitor body and cuff

carefully with a slightly damp, soft cloth. Do not
press. Do not wash cuff or use chemical cleaner
on it. Never use thinner, alcohol or petrol
(gasoline) as cleaner.

2. Leaky batteries can damage the unit. Remove

the batteries when the unit will not be used for
a long time.

3. If the unit is stored near freezing, allow it to

acclimate to room temperature before use.

4. This blood pressure monitor is not field service-

able. You should not use any tool to open the
device nor should you attempt to adjust anything
inside the device. If you have any problems with
this device, please contact HoMedics Consumer
Relations (contact information can be found on
the warranty page).

5. Do not immerse the unit in water as this will

result in damage to the unit.

6. Do not subject the monitor and cuff to extreme

temperatures, humidity, moisture, and direct
sunlight. Protect from dust.

7. Do not fold the cuff and tubing tightly.