HoMedics BPA-200 User Manual

Page 19

Text mode
Original mode

1. Press the User Select Button to choose User 1

or User 2.

After the user number is selected, press the

START/STOP button to confirm the chosen user.

2. With the cuff wrapped around your arm, press the

START/STOP button. Do not inflate the cuff unless it
is wrapped around your arm. All digits will light up to
check the display functions. The checking procedure
will be completed after about 2 seconds.

3. After all symbols disappear, the display will

show a blinking “0”. The monitor is “Ready to
Measure” and will automatically inflate the
cuff to start measurement.