HoMedics BPA-200 User Manual

Page 12

INSTALLING BATTERIES
Note: It is recommended that you use batteries only

for travelling or when it is not possible to use the
AC adapter.

1. Extend the tray so that the battery cover is fully

exposed.

2. Press down on latch and lift the battery cover

towards you to open the battery compartment.

3. Install or replace 4 “AA” sized batteries in the

battery compartment according to the indications
inside the compartment.

4. Replace the battery cover by clicking in the

bottom hooks first, then push in the top end of
the battery door.

Replace the batteries if:
1. The weak battery symbol appears on the display.
2. Nothing appears on the display when the power is

switched on.

Battery
Cover

Slide-Out
Tray