Hoover 1100 User Manual

Page 3

TO ATTACH HANDLE TO CLEANER

Remove tape and screw from handle socket and set aside for later use.

Connect electric plug from bottom of handle to electric plug projecting

from handle socket. Make sure plug assembly is positioned as shown
in illustration.

Push handle into place in handle socket. The excess wire and electric

plugs are guided into handle tube.

4. Line up holes in handle and handle socket. Insert screw and tighten

with screwdriver.

HANDLE

A D J U S T M E N T S

The handle on your clean-
er has three positions
storage,

operating,

and

low (for reaching under

low furniture). The handle
can be lowered by step-
ping on pedal at the left

rear of

cleaner.

The

handle should always be

in storage position when
cleaning tools are used.