Hitachi DIRECTOR'S SERIES P50X902 - Manual (Page 22)

22
Photo Input
This feature is useful for viewing digital still pictures from the MMC/SD memory cards using the Photo Input slot in the side panel of your
Hitachi Plasma Television.
NOTES
NOTES
Press the INPUT button to cycle through the INPUTS selections 1.
until the PHOTO INPUT is selected. Press the SELECT button
or CURSOR PAD .
+ +
or
HDMI 2
HDMI 3
Photo Input
Air/Cable
Input 1
Move Select SEL
Press the CURSOR PAD 2. or to access the next or
previous photo.
Next SEL Thumbnail [0-9] Jump
Press the SELECT button to view THUMBNAIL. 3.
Use the CURSOR PAD buttons 4. , , or and the SELECT
button to navigate and select individual chosen photos.
Press the picture number to jump from picture to picture. 5.
+
Press the INFO button to access PHOTO input menu and to 6.
view PHOTO information.
Press the CURSOR PAD 7. or and the SELECT button to
navigate and select the PHOTO Input menu.
Rotate
Slideshow
No. 02/08
06/13/05
2048x1536
DSC00467
Picture No.
Date
Resolution
File name
The maximum number of digital Photos that can •
be displayed is 999.
Press INFO button to show Picture Numbers •
in Thumbnail view, plus other information in
individual photos.
The screen may show “Input device not detected” •
if the MMC/SD memory card is not inserted.
ROTATE
Select this menu item to rotate selected photos either clockwise
(CURSOR PAD ) and counterclockwise (CURSOR PAD ).
Rotate
SLIDESHOW
Select this menu item to start a slideshow of the digital photos. While
the Interval sub menu is highlighted, press the SELECT button to
cycle through the interval time from 5, 10 and 30 seconds. Press
the SELECT button to stop on a chosen picture of the slideshow.
After 30 seconds, the slideshow will resume or press the SELECT
button again to continue with the slideshow.
Rotate
Slideshow Start
Interval 5sec
Photo file names modified on a computer •
should be 8 characters (Ex. ABCD1234.jpg). 1st
character: letters; 2nd to 4th: letters or numbers;
5th to 8th: numbers. Photo files should be first
placed on a sub directory name with 8 characters
(Ex. 123ABCDE). 1st to 3rd: number; 4th to 8th:
letters. The sub directory then should be placed on
a main directory with a “dcim” file name format.
Supported image types are up to 3072 x 2304; •
JPEG format should conform with DCF Standard
(Design rule for Camera File System).
This TV set displays only digital pictures from •
digital cameras which meet DCF Standard.
Pictures that were copied, edited or modified on a
computer may not be displayed on the TV set.