Havis-Shields KK-K9-D22-K - Manual (Page 10)

KK-K9-D22-K_INST_9-07
11. Mount window guards:
Note: window guards have holes around perimeter for
permanent mounting. These holes are not used with hinge kit.
They also come flat in shipping. The guard must be pre-bent
(outward) so it fits the contour of the vehicles window frame.
Do not use holes on side of window guard to mount with the
hinge application!
• Hold window guard with pre-assembled hinge and upper
bracket onto window frame.
• Make sure guard is centered on window.
• Hinge window down being sure to keep window guard centered and mark holes using
window guard as template on 1” bent lip of door panel.
• Pre-drill and attach hinge to lip on door panel using #10 x ½” Stainless flat head sheet metal
screws.
• Hinge window guard back to up position with upper mounting bracket attached and mark
mounting holes.
• Pre-drill and attach upper mounting bracket to window frame using #10 x ½” Sheet metal
screws.
• Re-attach window guard to bracket. This step may require some adjustment to align thumb
screws to nut-certs on bracket.
Note: Product is painted black for Demo purposes only. Product is shipped unpainted
Contour Window Guards