Harbor Freight Tools ROTARY HAMMER 94944 - Manual (Page 2)

SKU 94944 PAGE 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and cleaning procedures,
parts list and assembly diagram. Keep your invoice with this manual. Write
the invoice number on the inside of the front cover. Keep this manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
ITEM DESCRIPTION
Electrical Requirement 120 Volt / 60 Hz / 16 Amps (running)
Impactor Travel
1.65” (21mm)
Overall Dimensions 29” L X 6-3/8”W X 9-3/4” H (hammer only)
Blows per minute 750 - 1950
No load speed 100 - 250 RPM
Retainer Style Spring loaded rotational lock (2 positions only)
Bit Dimensions:
Chisel Bit (part#119): 3/4” Shank X 14-7/8” L
Masonry Drill (part# 118): 3/4” Dia. X 16-1/2” L
Noise Level
105 db (A)
Impact Energy 3.7 to 18.4 Ft/Lbs.
Tool Weight
32.2 Lbs.
Maximum Drill Bit Capacity 1.9” (concrete, brick, limestone)
Maximum Core Bit Capacity 5.9” (concrete, brick, limestone)
NOTE: Plug this tool into a 20 Amp dedicated circuit. Use GFCI Plug.
REV 07e