beautypg.com

Hitachi PJ-LC9 User Manual

Page 53

background image

51

ENGLISH

Maintenance

6.

Position the air filter and filter cover into place.

7.

Please reposition and reconnect the projector, to return as before. (12~16)

Then turn the projector on. (19)

(1) Set an air filter into place.

Push the points of “PUSH” mark.

(2) Interlocking the tabs, snap

the cover into place.

8.

Reset the filter time using the FILTER TIME function in the OPTION menu.

(45)

(1) Press the MENU button to display a menu.

When the EASY MENU has appeared, please skip the next step (2).

(2) Point at the “OPTION” in the left column of the menu using ▼/▲ button,

then press the ► button.

(3) Point at the ”FILTER TIME” using ▼/▲ button, then press the ► button. A

dialog will appear.

(4) Press the ▲ button to select “RESET” on the dialog. It performs resetting

the filter time.

►Before caring, make sure the power switch is off and the

power cable is not plugged in, then allow the projector to cool sufficiently. The

care in a high temperature state of the projector could cause an electric shock,

a burn and/or malfunction to the projector.

►Use only the air filter of the specified type. Do not use the projector with the

air filter and the filter cover removed. Do not remove the filter cover and the air

filter in a smoky or dusty place. It could result in a fire and/or malfunction to the

projector.

►The air filter should be cleaned periodically. If the air filter becomes clogged

by dust or the like, internal temperatures rise and could cause a fire, a burn

and/or malfunction to the projector.

WARNING

• Please replace the air filter when it is damaged or too soiled, and

also when you replace the lamp.

• Please reset the filter time only when you have cleaned or replaced the air

filter, for a suitable indication about the air filter. (45, 53)

• The projector may display the message such as “CHECK THE AIR FLOW” or

turn off the projector, to prevent the internal heat level rising.

NOTE

“PUSH” mark

Tabs

►Please be careful for the projector not to fall. While the projector

is placed lens-side up, hold the projector.

CAUTION

Tabs

(Usual filter cover)

(Filter cover for

bottom-up use)