Honeywell RTH6300B - Manual (Page 9)

RTH6300B Programmable Thermostat
7
Operating Manual
6
Set the time and day
1 Press the S SE ET T C CLLO OC CK K // D DA AY Y // S SC CH HE ED DU ULLE E
button, then press or to set
the clock time.
2 Press the S SE ET T D DA AY Y button, then
press or to select the day
of the week.
3 Press D DO ON NE E to save & exit.
Note: If the S SE ET T C CLLO OC CK K // D DA AY Y // S SC CH HE ED DU ULLE E
option is not displayed, press D DO ON NE E or
R RU UN N S SC CH HE ED DU ULLE E .
Note: If the display flashes Set Clock,
the thermostat will follow your settings
for the weekday “Wake” time period until
you reset the time and day.
Select the fan setting
Fan
Auto System
Heat
Set Clock/Day/
Schedule
Press the FFA AN N button to select Auto or On.
In “Auto” mode (the most commonly used
setting), the fan runs only when the heating
or cooling system is on. If set to “On,” the fan
runs continuously. Use this setting for
improved air circulation, or for more
efficient air cleaning.
Fan
On System
Heat
Set Clock/Day/
Schedule
Press S SE ET T C CLLO OC CK K // D DA AY Y // S SC CH HE ED DU ULLE E , then adjust time
4
:
30
PM
Fan
Auto System
Heat
Set Clock/Day/
Schedule
Press S SE ET T D DA AY Y , then select current day
Wed
Done
Set Day Set Schedule