Henny Penny HUMIDIFIED COUNTER WARMER HCW-8 - Manual (Page 20)

Model HCS-2/HCW-3/HCW-5/HCW-8
Fig. Item Description Function
No. No.
3-11 22 Float Switch An electro-mechanical sensing device used to automati-
cally control the water level in the water pan; the float
switch can be inactivated by the water control switch;
the float switch illuminates the low water light when it
senses a low water condition
3-12 23 Water Heater Two flat strip heaters, attached to the bottom of the
water pan, which measure approximately 3” wide by
25” long, and are rated at 1020 watts each
3-6 1105
3-2. OPERATING CONTROLS (Continued)
3-3. START-UP
Before using, the Henny Penny Heated Display Cabinet
should be thoroughly cleaned as indicated in the Shut-Down
and Cleanup section of this manual.
1. Move all switches and controls on the cabinet to the OFF
position.
2. Turn on power supply for the cabinet at the main circuit
breaker.
3. Place the grids in the water pan.
Step 2
Step 3