Hamilton Electronics MICROLAB 8534-01 - Manual (Page 3)

MICROLAB ® Carousel User Guide (June 2003)
1
About this guide
This user guide is for instructional and reference purposes. It describes the
components of the carousel and provides instructions for set up and operation.
About the
MICROLAB
®
Carousel
The MICROLAB ® Carousel (figure 1) is a modular component. The carousel
is intended for use with the MICROLAB ® SWAP application. Multiple units
can be placed around a MICROLAB ® SWAP (Swivel Arm Platehandler) to
provide additional plate capacity for a MICROLAB ® pipetting workstation.
The carousel provides an integrated solution for increased volume for plate
based sample processing.
The carousel works with two platter sizes to address multiple capacity
requirements. Various SWAP stacks and shelves can sit atop the carousel,
providing storage of plates and plate sized consumables.
The carousel can also be used for storage of disposable tips, for some
applications and instruments.
MICROLAB ® Vector software is used to control the carousel.
Figure 1: Carousel accessory