Henny Penny HHC-993 User Manual
Page 22
Model HHC-990
4-3. SPECIAL PROGRAMMING
(Continued)
SP-9
System Initialization
20. Press and “SP-9, DO SYSTEM INIT” shows in display.
(Factory Settings)
21. Press and hold until the display counts down from 3, and
the display flashes “-INIT-,” then “INIT*DONE”. This com-
pletes the initialization, and sets the control to factory settings.
SP-10
Audio Volume
22. Press and “SP-10, AUDIO VOLUME,” and the volume
setting (1 to 10) shows in display. Press
to test volume.
23. Press
to change the volume.
SP-11
Audio Tone
24. Press and “SP-11, AUDIO TONE -(Hz)-” and the tone
setting (50 to 2000) shows in display.
25. Press
to change the tone setting.
SP-12
Audio Effects
26. Press and “SP-12, AUDIO EFFECT” and the effect
setting (0 to 3) shows in display.
27. Press
to change the pattern of the tone.
SP-13
Language Options
28. Press and “SP-13, LANGUAGE,” and the preset
language shows in the display.
29. Press
to change to English, French, German,
Spanish, or Portuguese.
30. Press and hold the
button anytime during programming to
exit the Special Programming Mode.
For more information on the other settings of Special
Programming, call your local Henny Penny distributor in your
area, or call Henny Penny Corp. at 1-800-417-8405 or
1-937-456-8405.
303
4-5