Horizon Fitness CT83 - Manual (Page 7)

12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
13
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY STEP
ARC WASHER (J)
BOLT (L)
CONSOLE MAST
HANDLEBARS
BOLT (L)
120 mm
Qty: 4
ARC WASHER (J)
17 mm
Qty: 4
HARDWARE BAG CONTENTS :
A Open HARDWARE BAG .
B Attach LEFT HANDLEBAR to CONSOLE MAST using 2 BOLTS (L) and 2 ARC WASHERS (J).
NOTE: Look into holes before inserting bolt to prevent cables from
being damaged.
C Repeat on other side.
ASSEMBLY STEP
YOU’RE FINISHED!
POWER SWITCH CIRCUIT BREAKER
Connect power plug to the treadmill
and connect the cord to a power
outlet. The on/off switch is located
next to the power cord. Flip this
switch to the 'ON' position, so that
the switch is lit. You will hear a beep
and the console will turn on.
SCREW (M)
CONSOLE MAST
CONSOLE MAST COVER
SCREW (M)
10 mm
Qty: 10
HARDWARE BAG CONTENTS :
A Open HARDWARE BAG .
B Attach LEFT CONSOLE MAST COVER to CONSOLE MAST using 5 SCREWS (M).
C Repeat on other side.
CT83_Treadmill_Rev.1.7.indd 12-13 7/9/07 10:01:40 AM