Hayter Mowers Harrier 48 48ST - Manual (Page 31)

485101MT210999A
Regularly check that all securing nuts and bolts are tight.
Replace missing or damaged items immediately.
Lubricate the wheels, pivot points and linkages with engine
oil every 25 operating hours.
Apply a good quality medium grease to the inner control
cables at the point of entry and exit from their outer casings.
Check the clutch cable operation every 25 operating hours
and adjust if necessary. The clutch cable is adjusted cor-
rectly when the belt drive just engages with the clutch lever
positioned 32-38mm (1.1/4” - 1.1/2”) from the handlebar.
Unscrew the lock nuts (1) and screw the adjuster (2) in or
out as necessary. Tighten the locknuts (1) when correctly
adjusted.
IMPORTANT - PREVENT DAMAGE: ALWAYS oper-
ate the mower with the clutch cable correctly adjusted.
ALWAYS replace damaged cables.
MAINTENANCE 1.29 1.29
SECURING NUTS AND BOLTS
CS015
CS022
CS060
2
1
32-38mm
1.1/4"-1.1/2"
LUBRICATION
CLUTCH CABLE ADJUSTMENT