Hayter Mowers Harrier 48 48ST - Manual (Page 18)

485101MT210999A
Operate the throttle control lever: Push the lever to
‘choke’ position before starting a cold engine. It should
only be necessary to push the lever to the ‘fast’ position
before starting a warm engine.
Operate the engine start - grip: Stand behind the mower
and maintain a firm hold on the handlebar to prevent the
mower moving towards you. Use your right hand to hold
the engine start - grip and pull slowly until resistance is felt,
then pull rapidly to crank the engine. When the engine
starts carefully return the engine start - grip to the storage
position. If the engine does not start after 5 attempts - refer
to “Fault Finding”.
Allow the engine to warm up and return the throttle lever to
the ‘fast’ position after starting a cold engine.
IMPORTANT - PREVENT ENGINE DAMAGE: Never
pull the engine start - grip when the engine is running.
STARTING THE ENGINE 1.16 1.16
TO START THE ENGINE
CS052
CS053