Hoshizaki DB-130H - Manual (Page 11)

11
VI. Cleaning and Maintenance Instructions
IMPORTANT
Ensure all components, fasteners and thumbscrews are securely in place after
any maintenance or cleaning is done to the equipment.
A. Preparing the Ice Dispensing Bin for Long Storage
IMPORTANT
Drain the icemaker and remove all ice from the ice dispensing bin when
shutting off the icemaker/ice dispensing bin for storage. The ice dispensing bin
should be cleaned and wiped dry.
1) Shut off the icemaker. See the "Preparing the Icemaker for Long Storage" instructions on
the icemaker.
2) Turn off the power supply switches for both the icemaker and the ice dispensing bin after
removing all ice.
3) Clean the ice dispensing bin and wipe it dry.
B. Cleaning Instructions
WARNING
1. HOSHIZAKI recommends cleaning this unit at least once a year. (See the
"Cleaning Instructions" on the icemaker.) More frequent cleaning, however,
may be required in some existing water conditions.
2. To prevent injury to individuals and damage to the icemaker/ice dispensing
bin, do not use ammonia type cleaners.
3. Always wear liquid-proof gloves to prevent the cleaning and sanitizing
solutions from coming into contact with skin.
1. Cleaning Procedure
1) Clean and sanitize the ice dispensing bin/icemaker (see the cleaning instructions on the
icemaker) as conditions require.
2) Remove all ice from the bin.
3) Disconnect electrical power to the ice dispensing bin/icemaker.
4) Remove the drain gate and simply lift out the chute for cleaning.
5) Remove or reposition the icemaker to allow access to the inside. Be sure that the
icemaker is secured and cannot fall.