haier N60 - Manual (Page 31)

1.4.2.5 Cancel All Call Forwards
Press the left soft key [or click with the
touching pen the ‘choice’ in the hint area] of
“Cancel all the forwards”, then comes a
message frame saying ‘connecting the
network’; after having connected, another
hint will come out to conform. Once it is
conformed, all forwards are going to be
cancelled, including “Unconditional”, “No
Reply”, “When Busy” and “Not Reachable”.
1.4.3 Call Bar
This function can optionally bar the incoming
or outgoing calls.
1.4.3.1 Outgoing Call Bar
Dialing Bar can limit the outgoing calls.
1.4.3.1.1 All Outgoing Calls
Press the left soft key [or click with the
touching pen the “Choice”] to choose the
option of “Barring All Outgoing Calls”, and
then there are two choices “Able” and
“Disable”. You can use the Up-and-Down
button [or use the touching pen to click] to
move the focus; then press “OK”[or use the touching pen to click] to able or to disable.
Then the setting will take effect when the
password is input.
1.4.3.1.2 International Calls
Similar to “All Outgoing Calls”
1.4.3.1.3Home Calls Only
Similar to “All Outgoing Calls”
1.4.3.2 Incoming Call Bar
This function is to limit the incoming
calls.
1.4.3.2.1 All Incoming Call
Similar to “All Outgoing Calls Bar”
1.4.3.2.2 Roaming Calls
Similar to “All Outgoing Calls Bar”
1.4.3.3 Cancel Call Bar
The password is needed if you want to
cancel all bars. Once Call Bar is cancelled,
all the settings about outgoing and incoming
calls will be cancelled.
1.4.3.4 Change PIN Bar
Similar to changing the password of
“Security Firewall” in “Security Set”, first you
need to type in the old password, then you