haier N60 - Manual (Page 14)

on/off the phone. If the PIN is activated,
when you switch on the phone, you may be
prompted to enter the PIN code.
a. Input the PIN code
You can use PIN to protect your SIM card
form unauthorized use. Once the PIN is
activated, you will be required to enter the
PIN code at the time your phone is turned
on.
For the sake of confidentiality, the code is
displayed as a group of “*” in the screen.
Press the left soft key (or to click the soft key
with touch-pen) to confirm, after a short time,
if a right code is entered your phone will start
searching for the Network Settings. Once
the network name is shown on the screen,
you can dial or answer a call. If no network
name is shown on the screen, need you to
register again.
If you make a wrong input, you can press
CLR to delete the wrong numbers. If you
enter a wrong PIN code three times, the SIM
card will be locked and asked you input PUK code. If so, please contacting your SIM card
supplier.
6) Dial call
When the sign of the Network provider is
displayed screen, your phone enter idle
display to dial and answer call.
In quick feature display from the left first icon
is signal intensity. All mobile phones may be
obstruction subject to interference, which
could affect the performance of the mobile
phone. So moving within small range can
advance the signal strength.
Make a call in idle mode have dual mode
such as: direct dialing, call from the
phonebook, call from call list, call form SMS
and MMS, speed dial, call from SIM card. (if
you have set PIN code must input right
secret code to dial a call)
In any country where the digital GSM
network is used, you can make emergency
calls when your mobile phone in the
coverage network area (you can get it by
means of inspecting the network signal